JDS Uniphase cORL-A1 Operating Manual page 32

5 O
PERATION
SOURCE MAIN menu
⇒ Press [MENU ENTER] to open the SOURCE MAIN
menu.
Select Auto-λ OFF Switch Auto-λ on/off (see next
Select Modulation Select modulation frequency
Adjust Level
Configuration
All following settings refer to the SOURCE MAIN menu.
Auto-Lambda
Switching Auto-λ on/off
⇒ Press [MENU ENTER] to switch Auto-λ on and off
(toggle function).
Note: The signal is only modulated (at 270 Hz, 1 kHz,
2 kHz) when Auto-λ is deactivated.
28
section).
(see „Signal modulation" on
page 29).
Set output power level (see
„Adjusting the output power level"
on page 29)
Open configuration menu for
basic settings (see
the device" on page
cORL-A1
„Configuring
16).
JDSU