JDS Uniphase cORL-A1 Operating Manual page 34

5 O
PERATION
To change the output power level:
1. Select Level Adjust.
The display changes to EDIT mode. The first
wavelength is highlighted:
2. Press [▲▼] to increase/decrease value:
– press once to change the value one step at a time,
– hold down key to increase the step change rate.
3. Press [λ] to select next wavelength.
4. Press [MENU ENTER] to accept the settings and exit
EDIT mode.
30 cORL-A1 JDSU