JDS Uniphase cORL-A1 Operating Manual page 26

4 B O
ASIC
Displaying device information
⇒ Select Show Info in the CONFIGURATION menu.
The INFO menu opens and basic device information
is shown: device name, family, serial number,
calibration date, software version, battery type and, if
applicable, date and time.
Setting date and time
1. Select Edit date in the CONFIGURATION menu.
The EDIT DATE MENU opens:
2. Press [▲▼] to set year and press [MENU ENTER].
3. Press [▲▼] to set month and press [MENU ENTER].
4. Press [▲▼] to set day and press [MENU ENTER].
5. Select Edit time in the CONFIGURATION menu.
The EDIT TIME menu opens.
6. Press [▲▼] to set hours and press [MENU ENTER].
7. Press [▲▼] to set minutes and press
[MENU ENTER].
8. Press [▲▼] to set seconds and press
[MENU ENTER].
Note: The date and time will need to be set again if the
device is without any power for more than 1 hour.
The device is without any power if
• neither the SNT-121A Adapter is connected,
• nor a USB connection is established and
• no batteries are fitted or the batteries are discharged.
22
PERATION
cORL-A1 JDSU