JDS Uniphase cORL-A1 Operating Manual page 28

4 B O
ASIC
To install the firmware into the device:
1. Select Firmware Update in the CONFIGURATION
menu.
The FIRMWARE UPDATE menu opens:
2. Press [▼] to open the next window.
– or –
to cancel.
3. Press [MENU ENTER] to start the update.
– or –
Press [PREV] to cancel.
4. Connect the device to the PC via the USB interface.
Note: Once the update has been started it cannot be
stopped by pressing any of the keys.
To stop the update you must disconnect the
device from all power sources (adapter/charger,
batteries, USB connection).
24
PERATION
cORL-A1 JDSU