JDS Uniphase cORL-A1 Operating Manual page 17

Fig. 3 SNT-121A Adapter.
To change the AC line plug adapter:
1. Place the SNT-121A against the edge of a table or
bench as shown (see
2. Push the SNT-121A downwards.
3. Slide a different AC line plug adapter into the slot
(see Fig. 3).
Fig. 4 SNT-121A: Changing the AC line plug adapter.
To operate the cORL-A1 from AC power:
1. Connect the SNT-121A DC power cord to the
cORL-A1 DC power socket.
(The socket is located on the back panel.)
2. Plug the SNT-121A into the AC line socket.
The cORL-A1 switches on automatically when
powered from the SNT-121A.
JDSU
3 G
Fig. 4).
cORL-A1
S
ETTING TARTED
13