Panel Information Page - AMX Modero NXD-700Vi Operation/Reference Manual

AMX IR 455k
Assigned Port:
Build Number:
Creation Date:
Revision Date:
Last Save Date:
Blink Rate:
Job Comments:
The Panel Information page (FIG. 57) centers around Modero panel properties such as: resolution used,
on-board memory, firmware, address/channel information, and string information.
FIG. 57 Panel Information page (takes its' information from the touch panel)
The elements of the Panel Information page are described in the table below:
Back:
Connection Status icon:
Displays the AMX 455 kHz IR channel port used by the IR receiver on the
panel.
This information is pulled by the panel from AMX IR Receivers section of the
TPD4 Project Properties > IR Emitters & Receivers tab.
• For IR reception, this is the port that reports a push on for the corresponding
IR code.
• IR receivers and transmitters on G4 panels share the device address number
of the panel.
Displays the build number information of the TPD4 software used to create the
project file.
Displays the project creation date.
Displays the last revision date for the project.
Displays the last date the project was saved.
Displays the feedback blink rate (10th of second).
Displays any comments associated to the job. These comments are taken from
the TPD4 project file.
Returns you to the previously active touch panel page.
This visual display of the connection status allows the user to have a current
visual update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).