AMX Modero NXD-700Vi Operation/Reference Manual page 206

Syntax:
^PHN-REDIAL
Redials the last
"'^PHN-REDIAL'"
number.
Example:
SEND_COMMAND Panel,"'^PHN-REDIAL'"
^PHN- Syntax:
TRANSFER
"'^PHN-TRANSFER, <connection id>, <number>'"
Transfers the call
Variable:
to the provided
connection id = The identifying number of the connection
number.
number = The number to which you want to transfer the call.
Example:
SEND_COMMAND Panel,"'^PHN-TRANSFER, 1, 2125551000'"
The following table lists and describes SIP setup commands. Using any of these commands causes the
current user to go offline.
^PHN-SETUP- Syntax:
DOMAIN
"'^PHN-SETUP-DOMAIN, <domain>'"
Sets the realm for
Variable:
authentication.
domain = The realm used for authentication
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-DOMAIN, asterisk'"
^PHN-SETUP- Once the configuration has been updated, the ENABLE command should be run to
ENABLE re-register the new user.
Registers a new Syntax:
user
"'^PHN-SETUP-ENABLE'"
^PHN-SETUP- Syntax:
PASSWORD
"'^PHN-SETUP-PASSWORD, <password>'"
Sets the user
Variable:
password for the
password = The password for the user name
proxy server.
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PASSWORD, 6003'"
^PHN-SETUP- Syntax:
PORT
"'^PHN-SETUP-PORT, <port>'"
Sets the port
Variable:
number for the
port = The port for the proxy server
proxy server.
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PORT, 5060'"
^PHN-SETUP- Syntax:
PROXYADDR
"'^PHN-SETUP-PROXYADDR, <IP>'"
Sets the IP
Variable:
address for the
IP = The IP address for the proxy server
proxy server.
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PROXYADDR, 192.168.223.111'"