AMX Modero NXD-700Vi Operation/Reference Manual page 151

Syntax:
@PHT
Set the hide effect
"'@PHT-<popup page name>;<hide effect time>'"
time for the
Variable:
specified popup
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
page.
On.
hide effect time = Given in 1/10ths of a second.
Example:
SEND_COMMAND Panel,"'@PHT-Popup1;50'"
Sets the Popup1 hide effect time to 5 seconds.
@PPA If the page name is empty, the current page is used. Same as the 'Clear Page' command
in TPDesign4.
Close all popups
on a specified Syntax:
page.
"'@PPA-<page name>'"
Variable:
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Panel,"'@PPA-Page1'"
Close all popups on Page1.
@PPF If the page name is empty, the current page is used (see example 2). If the popup page is
part of a group, the whole group is deactivated. This command works in the same way as
Deactivate a
the 'Hide Popup' command in TPDesign4.
specific popup
page on either a Syntax:
specified page or
"'@PPF-<popup page name>;<page name>'"
the current page.
Variable:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Panel,"'@PPF-Popup1;Main'"
Example 2:
SEND_COMMAND Panel,"'@PPF-Popup1'"
Deactivates the popup page 'Popup1' on the current page.
@PPG If the page name is empty, the current page is used (see example 2). Toggling refers to the
activating/deactivating (On/Off) of a popup page. This command works in the same way
Toggle a
as the 'Toggle Popup' command in TPDesign4.
specific popup
page on either a Syntax:
specified page or
"'@PPG-<popup page name>;<page name>'"
the current page.
Variable:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Panel,"'@PPG-Popup1;Main'"
Toggles the popup page 'Popup1' on the 'Main' page from one state to another (On/Off).
Example 2:
SEND_COMMAND Panel,"'@PPG-Popup1'"
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).