AMX Modero NXD-700Vi Operation/Reference Manual page 195

Syntax:
^MPS
Set mouse pass
"'^MPS-<0-6>,<0-6>,...'"
through. Allows
Variable:
mouse input to
0 = Pass mouse input to G4 application.
multiple
1-4 = Pass mouse input data to a VGA card with USP output for redirection to a
destinations
computer.
simultaneously.
Destinations are
5 = Pass mouse buttons to the NetLinx master in the form of a custom event.
comma delimited.
6 = Pass mouse buttons and movement to the NetLinx master in the form of custom
Note: This events.
command causes
Example:
all mice
SEND COMMAND Panel,"'^MPS-0'"
connected to the
G4 product and Passes the mouse input to a connected G4 application.
any mice on a
computer
connected via a
VGA card with
USB output to
reset to position
0,0.
^TPS Syntax:
TPI only.
"'^TPS-<0-1>'"
Set touch pass
Variable:
through.
1 = Creates a transparent connection between the touch input serial port and the
program port. This is useful for connecting a PC to the program port and controlling
touch input on that PC from the touch panel connected to the touch input port. This will
cause the command terminal on the program port to shutdown.
0 = Undoes the changes.
Example:
SEND COMMAND Panel,"'^TPS-1'"
Enables the touch pass through.
^VKS Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
SHIFT.
Send one or more
virtual key strokes Refer to theEmbedded Codes table on page 174 that define special characters which
to the G4 can be included with the string but may not be represented by the ASCII character set.
application.
Syntax:
"'^VKS-<string>'"
Variable:
string = Only 1 string per command/only one stroke per command.
Example:
SEND COMMAND Panel,"'^VKS-'8"
Sends out the keystroke 'backspace' to the G4 application.