Button Commands - AMX Modero NXD-700Vi Operation/Reference Manual

No. Border styles
127 Menu Right Rounded 105
128 Menu Right Rounded 115
129 Menu Right Rounded 125
130 Menu Right Rounded 135
131 Menu Right Rounded 145
132 Menu Right Rounded 155
133 Menu Right Rounded 165
134 Menu Right Rounded 175
135 Menu Right Rounded 185
136 Menu Right Rounded 195
137 Menu Left Rounded 15
138 Menu Left Rounded 25
139 Menu Left Rounded 35
140 Menu Left Rounded 45
141 Menu Left Rounded 55
142 Menu Left Rounded 65
143 Menu Left Rounded 75
144 Menu Left Rounded 85

"^" Button Commands

These Button Commands are used in NetLinx Studio and are case insensitive.
All commands that begin with "^" have the capability of assigning a variable text address range and
button state range. A device must first be defined in the NetLinx programming language with values
for the Device: Port : System (in all programming examples - Panel is used in place of these values).
Variable text ranges allow you to target 1 or more variable text channels in a single
command.
Button State ranges allow you to target 1 or more states of a variable text button with a single
command.
"." Character is used for the 'through' notation, also the "&" character is used for the 'And'
notation.
"^" Button Commands
^ANI Syntax:
Run a button
"'^ANI-<vt addr range>,<start state>,<end state>,<time>'"
animation
Variable:
(in 1/10 second).
variable text address range = 1 - 4000.
start state = Beginning of button state (0= current state).
end state = End of button state.
time = In 1/10 second intervals.
Example:
SEND_COMMAND Panel,"'^ANI-500,1,25,100'"
Runs a button animation at text range 500 from state 1 to state 25 for 10 second.
No. Border styles
145 Menu Left Rounded 95
146 Menu Left Rounded 105
147 Menu Left Rounded 115
148 Menu Left Rounded 125
149 Menu Left Rounded 135
150 Menu Left Rounded 145
151 Menu Left Rounded 155
152 Menu Left Rounded 165
153 Menu Left Rounded 175
154 Menu Left Rounded 185
155 Menu Left Rounded 195