Charging The Batteries - TESTO Sensor LD pro Instruction Manual

Charging the batteries

12 Charging the batteries
The battery is charged within the device. For this, the supplied plug-in power supply is connected to the
built-in charging socket of the Testo Sensor LD pro and the 230V socket.
Connect external power
supply to the charging socket.
The Testo Sensor LD pro checks the charging status of the battery and starts the charging process
automatically if necessary.
Protection of exhaustive discharge !
To protect the Li-ION accumulator of exhaustive discharge the device is switching off automatically if a
cell voltage of 6,4V will be reached.
Testo Sensor LD pro - V2.00
Symbol „CHG" is
displayed during
charging.
CHG
Page 40 of 48