Settings; Election Of Measurement Tool - TESTO Sensor LD pro Instruction Manual

Operation

10 Settings

The operation is largely self-explanatory and menu-driven via the touch panel.
The selection of the respective menu items occur via short "tapping" with the finger or a soft round pen.
Attention: Please use no pens or other objects with sharp edges!
The foil can be damaged!

10.1 election of measurement tool

Actual there are 4 different measurement tools available
 Acoustic trumpet
 Focus tube with focus tip
 Gooseneck
 Parabolic mirror

Home Configuration
oder

Setting button
Testo Sensor LD pro - V2.00
For general measurements (0.2 - 6m) in directly accessible areas
For punctual measurements in directly accessible areas
For punctual measurements in hard-to-reach areas
For leakage measurements (3m - 12m) at longer distances
 
Parameter Sensor type

Parameter Sensor type
The required or desired measuring tool can
"Sensor type"
be selected using the
"Parameters"
selection field in the
After selection of the field, the menu
"Select sensor type"
is opened..
Please select the required measuring tool
"OK"
and confirm it with .
Note: The measuring tools
"Parabolic mirror"
and
activated / loaded during initial
commissioning, see chapter
"Import/Export".
Use the key e o obtain further
information such as the serial number.
menu.
"Gooseneck"
must be
Page 17 of 48