Settings
11.4.2.4
System update
If required, there is the possibility for the Testo Sensor LD pro to download a firmware update to
the device via the USB stick. You receive the software update from your supplier.
The received file must then be stored on the USB stick and transferred to your device as described
below.
Settings Device settings System-Update
11.4.2.4.1
Check for Updates
Settings Device settings System-Update check USB-Stick for new Updates
If it is required to install all files (not only the files marked as new), you have press
the button „Force all"
Testo Sensor LD pro V2.00
P1: V033
C1
I1
Update Kanäle
P1: V033
C1
I1
Update Kanäle
Overview of System-Update-Functions.
After pressing the button
for new Software updates"
messages appear in the window, is the Testo
Sensor LD pro is not properly connected to
the USB flash drive or there are no files
available.
If the Testo Sensor LD pro is correctly
connected to the USB stick and there are new
versions of the individual SW Parts, the new
versions are marked in red.
The update is started by pressing the
„Update selections". button.
"Check USB Stick
the following
Page 35 of 48