Configuration - TESTO Sensor LD pro Instruction Manual

Operation

10.3 Configuration

In the configuration menu the unit system is set and the required parameters are defined to calculate
the corresponding cost/year.

Home Configuration
Testo Sensor LD pro V2.00
By selecting the national standard of „ISO" or
„US" you can store your production cost for
„1000 Nm³ " or „1000 SCF". These inputs and
the "Operating hours/year" are used as the
basis for the cost calculation.
The basic costs are entered via the text boxes
„Cost / 1000 Nm³" for „ISO", „Cost / 1000 SCF"
for „US" and "Operating hours/year".
The currency of the production costs can be
stored as text in the text field. „Currency".
The inputs „Parameter" and „Meas. Point"
Follow the same procedure as described in
chapter 10.2.
Acceptance of the values and return to the basic
settings menu is done by pressing the „Home".
Button.
Page 19 of 48