Calibration Of Touchpanel - TESTO Sensor LD pro Instruction Manual

Settings
11.4.2.6

Calibration of touchpanel

Settings  Device settings  calibrate touchscreen
Testo Sensor LD pro V2.00
If necessary, the touch-screen calibration
can be changed here.
Push Calibrate and it appears, 1. left
above,2. bottom right, 3. bottom left, 4.right
above and 5. in the middle, a calibration
cross that must be pushed consecutively.
If the calibration finished positive a message
"Calibration successful"
be confirmed with OK.
Is this not the case, so you can repeat the
calibration with the help of the
Calibrate buttons.
appears and have to
Cancel and
Page 37 of 48