Storing Of The Measurement - TESTO Sensor LD pro Instruction Manual

Operation

10.6 Storing of the measurement

To store the measurements please press either the button „Store" on the foil keypad, see chapter
Device components and controls, or by button „Store" in the display.
All data are stored on to the internal SD card.
The measurement data, the measurement point and the image of the measurement point are saved as a
journal, which can be exported later and a report can be created with the Testo Leak Reporter (Order-
no.: 8900 0510).
After pressing one of the two „Store" keys, the corresponding information for the measuring point must
be completed. The measuring point information of the last stored storage (company, building and
location) is displayed, the numbering of the leak tag is increased by 1.
e.g.:
Testo Sensor LD pro V2.00 Page 21 of 48