System Settings; System Update - TESTO Sensor LD basic Instruction Manual

11.3.3 System settings

11.3.3.1

System update

If required, there is the possibility for the Testo Sensor LD basic to download a firmware via
the USB stick.
The file must then be stored on the USB stick and transferred to your device as described
below.
Settings ➔ System ➔ System-Update
11.3.3.1.1 Check for Updates
Settings ➔ System → System-Update➔ check USB-Stick for new Updates
If it is required to install an older software version, you have press the button „Force all".
Testo Sensor LD basic V1.00 EN
P1: V033
C1
I1
Update Kanäle
P1: V033
C1
I1
Update Kanäle
Overview of System-Update-Functions.
f after pressing the button
for new Software updates"
messages appear in the window, is the Testo
Sensor LD basic is not properly connected to
the USB flash drive or there are no files
available.
I If the Testo Sensor LD basic is correctly
connected to the USB stick and there are new
versions of the individual SW Parts, the new
versions are marked in red.
The update is started by pressing the
„Update selections" button.
Operation
"Check USB Stick
the following
Seite 14 von 22