Polycom RealPresence Centro User Manual page 47

Procedure
» Tap to open the Quick Access menu, then tap
When you stop the video, a video pause icon
Start Sending Video
If your near-end site video is currently not displayed, you can choose to display your video to others in a
conference call.
Procedure
» Tap to open the Quick Access menu, then tap
Switch between Full Screen Video and the Home Screen
When your call connects, the system automatically shows video in full screen view. You can switch back
to the Home screen during a call if, for example, you need to adjust a user setting and your system is
configured to allow you to do so.
Procedure
1. Press the Home key
2. Press the Back key
Change the Video Layout
What you see during a multipoint call can vary depending on how the RealPresence Centro is set up, the
number of sites in the call, the number of monitors you are using, and whether content is shared. The
multipoint viewing layout configured on the host system is the one used in the call.
You can change the layout of how video, self view, and content display during a multipoint call. The layout
options vary depending on how many participants are in the call or if content or Self View is on.
Procedure
1. Tap to open the Quick Access menu, then tap
2. Select one of the available layouts.
Configure Automatic Self View Control
If your administrator allows access to the Automatic Self View Control setting, you can configure this
setting to enable users to display or hide the Self View window.
Procedure
1. From the Home screen, tap
2. Do one of the following:
• When in a call, tap
• When not in a call, tap
3. Tap the Automatic Self View Control check box.
Allow Video Display on the Web
If your administrator allows access to User Settings, you can choose whether to allow others to view the
room where the solution is located or the video stream from calls in which the solution participates.
on the remote control to go to the Home screen.
on the remote control to see the full screen.
to open the Quick Access menu.
More > Settings > User Settings >
Settings > User Settings >
Camera Off.
displays.
Camera On.
More > PIP Layout.
Camera.
Settings
Camera.
45