Polycom RealPresence Centro User Manual page 19

Resume a Call
When you no longer want to keep a call on hold, you can resume the held call.
Procedure
» Do one of the following:
• Tap Resume Call
• Tap to open the Quick Access menu then tap
Switch Between Calls
When you have a call on hold, you can switch between the held and active calls.
Procedure
1. Tap to open the Quick Access menu.
2. Tap More > Switch To.
Conference Calls
Conference calls involve three or more endpoints. During a conference call, multiple sites can see and
hear each other and share content.
You can host conference calls using a video conferencing system with multipoint capabilities, or you can
use a bridge, such as the RealPresence
administrator to find out if this feature is available.
Place a Conference Call
To start a new conference call, you need to start with the first participant or site and add other participants
after each participant answers the call.
Procedure
1. Call the first site.
2. After the call connects, tap
Call.
3. On the Place a Call screen, enter your contacts number, tap
select a contact from Contacts, Speed Dial, or Recent.
4. Repeat steps 2 and 3 until all sites are connected.
Answer an Incoming Call during a Multipoint Call
While in a conference call, you can choose to hold the conference call and answer an incoming call.
Procedure
» Tap Hold + Answer to hold the current call and answer the incoming call.
®
Collaboration Server 800s. Check with your system
to open the Quick Access menu, then tap
More > Resume.
More >
and enter your contact's name, or
Calling
Add a
17