Polycom RealPresence Centro User Manual page 26

• Tap to open the Quick Access menu, tap
the onscreen dial pad.
Playback a Recording using Touch Tones
You have immediate access to playback a recording as long as the Media Manager TVUI continues to
display and the call hasn't ended. After this time, you can access the recording in the RealPresence
Media Suite portal in a list of archives where recordings are saved. Contact your administrator for
information on accessing the portal.
Procedure
» Do one of the following:
• On the remote control, press *5.
• Tap to open the Quick Access menu, tap
the onscreen dial pad.
Recording Calls with RealPresence Media Suite using
Onscreen Controls
When RealPresence Media Suite is enabled for your system, recording controls display on the room
system, and you can start, pause, and stop a recording.
Record Calls with RealPresence Media Suite using Onscreen
Recording Controls
You can use either the touch monitors or the remote control to start a recording. Unless the administrator
for the RealPresence Media Suite has disabled the Start Recording Immediately option, the recording
starts immediately after the TVUI displays.
Note: You can only start a recording in a point-to-point call, and only one participant can start a
recording during a call. If you start a recording during a conference call or more than one
participant starts a recording, the call changes to a point-to-point call and the participant layout
changes to show the speaker only.
Procedure
» Select to open the Quick Access menu, then select
Pause a Recording using Onscreen Recording Controls
You can pause a recording at any time during a video call or live stream.
Procedure
» Select to open the Quick Access menu, then select
Resume a Recording using Onscreen Recording Controls
After you pause a recording, you can resume the recording and continue live streaming.
More > Touch Tones, and enter *3 on
More > Touch Tones, and enter *5 on
Record Controls >
Record Controls >
Recording Calls
Start.
Pause.
24