Polycom RealPresence Centro User Manual page 37

» From the active call screen, under People, select the participant that you want to hang up, then tap
.
Sharing Content
How you share content depends on whether you are controlling your system with the remote control, the
touch interface, or a Polycom touch device.
You can share one content source and one people video source at a time, and you can switch to a
different type of content or people video source as needed. Participants at other sites can also show
content or people video sources, but only one site can share content at any given time. To show people
and content at the same time, your system administrator must configure the RealPresence Centro system
for content.
Note: You cannot display copyright-protected content, such as that included on some DVDs.
You can share the following types of content:
• Any information stored on a computer connected to a RealPresence Centro system
• Images on a USB drive connected to the system
• Content sent from the Polycom
connected to the RealPresence Centro system
• Content from a DVD or DVR player connected directly to a RealPresence Centro system
• Content from the Polycom
Managing Content from Microsoft Clients
Your system can receive content from Microsoft Lync 2013 and Skype for Business 2015 remote desktop
(RDP) clients during active calls when content is initiated from the Microsoft clients. Be aware that you
cannot share content, including content shared through People + Content IP or VisualBoard, while
actively receiving content from Microsoft clients.
Control Shared Skype for Business Content
Contacts using a Microsoft client to share content can select a specific RealPresence Centro system to
give control over the content. After your system receives and takes control of content from the client, you
can use a USB mouse and keyboard to open and use shared applications, programs, and files on the
system sharing content.
Note: General Microsoft feature restrictions apply. Password enabled applications, programs, or files
remain password enabled when using this feature. For more information, refer to Microsoft
documentation.
Procedure
1. Connect a USB mouse to the RealPresence Touch device.
2. If you want to use applications, programs, or files that require keyboard functions, connect a USB
keyboard to the system.
3. On the system, select the Control Remote check box.
The system now controls the content received from the Microsoft client.
®
People + Content
® ™
VisualBoard application
Using RealPresence Centro with Skype for Business
™
IP application, which is installed on a computer
35