Polycom RealPresence Centro User Manual page 46

Mute Automatically-Answered Calls
You can choose to mute the microphones when a video call is answered automatically. The status
indicator at the base of the solution glows red when the microphones are muted then progressively dim.
Procedure
1. Tap to open the Quick Access menu then tap
2. Tap Mute Auto Answer Calls.
3. After the call connects, tap Unmute when you're ready to unmute the microphones.
When a call is muted, the muted microphone
Video Adjustments
During a video call, you can turn on or off Self View and turn on or off the camera to stop sending video.
Note that you cannot control the position of the camera during calls on the RealPresence Centro.
When the system is not in a call, you can turn Self View on and off to bring the camera up or put the
camera down. If the camera does not go up or down when you turn Self View on or off, then your system
administrator has set the camera to always be up when the system is on and active.
Turn On Self View
Self View shows you the video stream that your contacts see when they are in a call with you. You can
choose to turn Self View on to view the same video stream the far end sees. If Automatic Self View is
enabled, the Self View On option does not display. You can display Self View from the Layout menu (see
the section Change the Video
Procedure
1. Tap to open the Quick Access menu.
2. Tap Self View On.
Turn Off Self View
You can choose to turn off Self View if you do not want to view your video stream.
If the setting Automatic Self View is enabled, the Self View Off option does not display. You can turn Self
View off from the Layout menu (see the section
Procedure
1. Tap to open the Quick Access menu.
2. Tap Self View Off.
Stop Sending Video
Whether you are in a call or before a call begins, you can turn your camera off to stop sending video.
Turning off the camera enables you to stop sending your video stream to contacts while remaining
connected to the call.
Note: When you stop your video in a Lync environment, video transmission ceases and no Self View
displays. When you stop your video in a non-Lync environment, a video pause image is sent to
the far end.
Layout).
Change the Video
Settings > User Settings > Meetings.
icon displays.
Layout).
Settings
44