Polycom RealPresence Centro User Manual page 11

Figure 2: Panoramic filmstrip and active speaker view
RealPresence Centro Status and Indicators
The RealPresence Centro has status indicators at the base of the solution to let you know whether the
system is in standby mode, active, or in a call. The following table lists the status indicators that display
and the status associated with each indicator.
Table
LED Indicator
No LED
Amber
Blue
Green
Red
Blinking blue and amber
RealPresence Centro Status and Camera Position
By default, the 360-degree camera is motorized and set to be up when the system is in use or in a call.
The camera is down when the system is off, in standby mode, or not in a call. You cannot control when
the camera is up or down other than when you show or hide Self View when not in a call.
Your administrator can set up the camera's behavior and the duration the camera remains up after a call
has ended. The following table lists the camera's default position during the different states.
Status
Off
Sleep
Standby
On
Not in a call
In an audio or a video call
Microphones muted
System starting
Software update
Getting Started with Polycom
® ™
RealPresence Centro
9