Chapter 4
Axle Clamp Removed for 3rd Axle Bolt Setting
FIGURE 23.
Top
Axle
Bolt
IF THE AXLE BOLT IS ON SETTING 3 ONLY - Remove the axle clamp and bolts.
19.
Note:
Keep the axle clamp and bolts for future use. They will be needed if the machine's axle tread
setting ever needs to be changed.
Sensor Bracket Installed
FIGURE 24.
Align the sensor mounting bracket over the bolt holes and axle mounting bracket so that the sensor is
20.
positioned above the kingpin.
36
3
2
1
John Deere 7X00/7X10 Series SmarTrax™ Installation Manual
7
6
5
4