Raven SmarTrax Installation Manual page 39

Axle Mounting Bracket
FIGURE 21.
Locate the 2WD axle mounting bracket (P/N 107-0172-044).
15.
Axle Mounting Bracket Installed
FIGURE 22.
Align the top hole in the axle mounting bracket with the first axle bolt hole.
16.
Align the bottom hole in the mounting bracket with the first hole in the bottom row.
17.
Secure the axle mounting bracket to the axle using two M20 x 2.5 x 90 mm hex bolts (P/N 311-0070-034),
18.
two 0.812" ID x 1.469" OD x 0.134" thick washers (P/N 313-2300-023), and two M20 x 2.5 nylon insert lock
nuts (P/N 312-4000-212).
Manual No. 016-5034-004
Wheel Angle Sensor Installation
35