Raven SmarTrax Installation Manual page 33

Rod Mounting Bracket Installed
FIGURE 8.
Single Steering Cylinder Models
Install the rod mounting bracket and M10 bolt on the muffler clamp using two 0.325" ID x 0.505" OD x
9.
0.040" thick washers (P/N 313-2301-005) and two 5/16" nylon insert lock nuts (P/N 312-4000-059).
Note:
Do not tighten the nuts to allow for adjustment later in the procedure.
Note:
The M10 bolt should be pointing toward the rear of the machine.
Spacers Installed on Rod Mounting Bracket
FIGURE 9.
Single Steering Cylinder Models
Install one or two spacers (P/N 107-0172-037) on the M10 bolt, depending on the machine's configuration.
10.
Note:
Single steering cylinder models require two spacers. Dual steering cylinder models require one
spacer.
Manual No. 016-5034-004
Dual Steering Cylinder Models
Left
Front
Tire
Dual Steering Cylinder Models
Wheel Angle Sensor Installation
Left
Front
Tire
29