Table of Contents
Advertisement
10.1.1 Setting the heating profile
Two options are available to adapt the drying characteristics optimally to the sample
being used:
Standard drying
Quick drying
Press
to select the menu item <1 Temperature Profile> and
acknowledge by
Select desired setting with
TDLG_A-BA-e-2011
This heating profile is suitable for most
samples. The sample is heated to the set
temperature at normal output and is then
kept at this temperature.
Quick drying is first and foremost suitable
for samples with a moisture content of more
than 30%. After start-up the temperature
will be rising fast and exceed the set drying
temperature by approx. 30% for about two
minutes. This compensates the evaporation
coldness and that way the drying process
will be accelerated.
Then the temperature is controlled down to
the set value.
.
and acknowledge by
.
35
Advertisement
Table of Contents
