7.5 Switching on/off
Supply balance with power via the mains power cable. The display unit lights
up, the software version and the model name are shortly displayed. From that
point onwards the weighing scale will be in standby mode.
To turn on the display, press the F6-key.
As soon as the weight display appears, the instrument will be ready to weigh.
To switch off the appliance and to transit into standby-operation,
press the F6-key.
7.5.1 Selecting user language
The display is configured to German upon delivery. For setting additional languages
see chap. 9.2.1.
7.5.2 Initial Commissioning
In order to receive precise weighing results from electronic balances, the instrument
must have reached its operating temperature (see warming-up time chapter 1).
The integrated balance must be connected to the power supply during this warming
up period.
The accuracy of the integrated balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
7.6 Connection of peripheral devices
Before connecting or disconnecting of additional devices (printer, PC) to the data
interface, always disconnect the moisture analyzer from the power supply.
Only use accessories and peripheral devices by KERN, as they are ideally tuned to
the appliance.
18
TDLG_A-BA-e-2011