Setting The Heating Profile - KERN DLT-N Operating Manual

11.1.1 Setting the heating profile

This function offers different heating profiles to adapt the drying characteristic
optimally to the used sample.
1. Standard drying
Display pictogram during drying
2. Quick drying
Display pictogram during drying
DLT_N-BA-e-1421
Tap
< Heating profile >
(see chap. 11.1).
The available heating profiles are displayed:
•
Standard
•
Fast
•
Ramp
•
Steps
This heating profile are used for most
samples. The sample will be heated up to the
set drying temperature,
selectable 35°C -160°C
Tap < Standard >.
The numeric input window will be displayed.
Enter required drying temperature,
selectable 35°C – 160°C.
Import entry with
<OK>
the previous screen.
This heating profile is suitable for samples
with high moisture content (e.g. liquids).
After start the selected temperature will be
exceeded for a short time - to compensate
the evaporation coldness and to accelerate
the drying process.
Then the temperature is automatically
controlled down to the set value.
Tap < Fast >.
The numeric input window will be displayed.
Enter required drying temperature, selectable
35°C – 160°C.
Import entry with
<OK>
the previous screen.
in dropdown menu
, the display returns to
, the display returns to
41