11.2 Carrying Out Measurement
Having defined the drying parameter (see chap. 11.1) for your sample, measurement
can be started. The display shows the current settings and guides you step by step
through the measurement process.
Display before starting the measurement:
Pos.
[1]
[2]
[3]
[4]
[5]
Start measurement:
Press the button under
guidance
When the preheating stage is connected, wait until the set temperature is
reached (for the procedure, see chap. 10.1.2).
Place the empty sample tray on the removal aid and put into the sample
chamber.
Close the lid and wait until the scale will automatically be reset to zero.
42
Designation
Set drying temperature
Active heating profile
Current date
Current time
Active switch off criterion
and follow the instructions of the operator
TDLG_A-BA-e-2011