Glp Settings - KERN DLB-A Operating Manual

10.2 GLP settings

This menu item is used to define which information is to be printed in the header of
the weighing logs.

In the main menu press
confirm by

Acknowledge by
The active digit is underlined.
Select cipher
Increase cipher (0 – 9) or character (A – Z), ( / . - ).
Press the key long time to switch over between capital letters and
lower case letters.
Reduce cipher (0 – 9) or character (, [blank], -, A – Z).
Press the key long time to switch over between capital letters and
lower case letters.
Press the button once to delete the underlined character.
Press the key long time to delete the whole text.
Confirm input
Cancel input
TDLG_A-BA-e-2011
to select the menu item <2 GLP Setup> and
.
The following parameters are available:
1. ID Balance
2. ID User
3. ID Project
and enter the text subsequently as follows.
39