Placing - KERN DLB-A Operating Manual

7.3 Placing

The appliance is supplied part-assembled. Immediately after unpacking check if the
delivered items are complete. Assemble the separate component parts according to
their sequence
16
1. Insert wind protection ring
2. Insert removal aid
3. Carefully insert the tray holder and
twist until it engages.
4. Fit sample tray.
5. Level the device with foot screws
until the air bubble of the water
balance is in the prescribed circle.
Check levelling regularly.
6. Connect the scale and the heating
top to the cable as shown on the
diagram.
Connect the mains cable to the mains
connecting bush of the device,
see chap. 7.4
7. Mains connection
TDLG_A-BA-e-2011