Fuel Tank - Honda CBR1000F Manual

Disconnect the headlight sockets and turn signal connec-
tors.
Remove the upper faining from the frame.
Remove the screws and turn signal unit.
Remove the bolts and headlight unit.
Installation
Installation is in the reverse order of removal.
Fuel Tank
• Gasoline is extremely flammable and is explosive
under certain conditions. Work in a well ventilated
area. Smoking or allowing flames or sparks in the
work area or where gasoline is stored can cause a
fire or explosion.
Remove the seat and both side coven; (page 2,3)
Remove the fuel tank front mounting bolts and washers.
Open the fuel tank and support the tank using the support
rod.
Disconnect the fuel level sensor wire connector.
Disconnect the fuel valve vacuum tube and fuel tube.
Disconnect the fuel tank air vent tube.
Frame/Body Panels/Exhaust System
(1) HEADLl§_HT SOCKETS
(2)
TURN SIGNAL CONNECTORS
~\
\
\
\\
\
(2)
HEADLIGHT UNIT
.
~~
'
( 1)
TURN SIGNAL UNIT
~(1)
BOLTS
~
(2)
FUEL
TANK
\
~
)~
(3) SUPPORT ROD
(4) AIR VENT TUBE
(3) FUEL TUBE
I
(2) VACUUM TUBE
(1) CONNECTOR
2-9