Honda CBR1000F Manual page 107

Cylinder Head/Cylinder/Piston
Requisite Service
• Exhaust system removal/installation (page 2-10) • Cam chain tensioner removal/installation (page 8-8)
• Carburetor removal/installation (page 5-4)
• Camshaft removal/installation (page 8-4)
Procedure O'ty
Remarks
Removal Order Installation is in the reverse order of removal.
( 1)
Water hose bolt
4
(2)
Water hose
2
(3)
O-ring
2
(4)
Cylinder head nut/washer
8/6
(5) Oil guide setting plate
1
(6)
Oil guide plate 1 NOTE
• Attach the piece of wire to the cam chain to prevent it
from being dropped into the crankcase, then remove it.
(7) Cylinder head socket bolt 4
(8)
Cylinder head cap nut/washer
4/4
(9)
Engine mounting bolt (front/upper)/collar 2/2
(10)
Cam chain slider 1 Raise the cylinder head a little and pry off the cam chain
slider from the cylinder groove.
( 11)
Cylinder head assembly 1 Disassembly/assembly (page 8-12)
(12)
Gasket
1
(13)
Dowel pin 2
8-11