Honda CBR1000F Manual page 170

Rear Wheel/Suspension
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated
disc with a high quality brake degreasing agent.
NOTE
• When servicing the rear wheel, place the motorcycle on its center stand.
• Do not operate the brake pedal or lever after the rear wheel is removed.
• Adjust the drive chain free play after installing the wheel.
Procedure O'ty
Remarks
Removal Order
Installation is in the reverse order of removal.
(1)
Rear axle nut 1
• Loosen the drive chain adjuster fully, then remove the
axle nut.
• Move the rear wheel forward, and derail the drive
chain from the driven sprocket.
(2) Rear axle washer
1
(3) Rear axle
1
(4)
Rear wheel
1
(5)
Right side collar
1
(6)
Left side collar
1
12-3