Honda CBR1000F Manual page 183

Brake System
Front Brake Pad Replacement
(1)
c
18 (1.8, 13)
(2)
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated
disc with a high quality brake degreasing agent.
• Check the brake system by applying the brake lever and pedal after pad replacement.
NOTE
• The brake pad replacement can be serviced without disconnecting the hydraulic system.
• Clean the caliper inside especially around the caliper pistons before installing the brake pads.
• Always replace the brake pads in pairs to assure even disc pressure.
• Operate the brake lever and pedal to seat the caliper pistons against the pads after the pad replacement.
Procedure
O'ty Remarks
Removal Order Installation is in the reverse order of removal.
(1)
Pad pin bolt
1
At removal, remove the pad pin while pushing
the
retainer.
(2)
Brake pad 2
13-4