Honda CBR1000F Manual page 226

Ignition Coil
Inspection
Measure the primary coil resistance between the terminals.
Standard: 2.5 - 3.2
Q
(20°C/68°F)
Measure the resistance between the spark plug caps.
Standard: 21 - 27kQ (20°C/68°F)
If the measured value out of the specification, remove the
spark plug caps from the spark plug wires and measure the
resistance between the spark plug wires.
Standard: 11 -17 kn (20°C/68°F)
Removal/Installation
Disconnect the spark plug cap from the cylinder head.
Remove the ignition coil mounting bolts.
Disconnect the primary wires and remove the ignition coil.
Installation is in the reverse order of removal.
Ignition
System
(1) IGNITION COIL
______,,,--: -------,:J,______,:
~
(1) SPARK PLUG WIRE
(2) IGNITION
COIL
· SPARK PLUG
· /'---0 CAP
15-9