Honda CBR1000F Manual page 188

Brake System
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated
disc with a high quality brake degreasing agent.
CAUTION
• Avoid spilling brake fluid on painted, plastic, or rubber parts. Place a rag over these parts whenever the system is
serviced.
Requisite Service
• Front brake pad replacement (page 13-4)
• Brake system air bleeding (page 13-25)
Procedure
O'ty Remarks
Removal Order Installation is in the reverse order of removal.
(1)
Oil bolt
2
(2)
Sealing washer
4
(3)
Brake hose eyelet joint
2
At installation, press the eyelet joint stopper pin against
the caliper body while tightening the oil bolt.
(4)
Caliper mounting flange bolt
2
(5) Right front brake caliper assembly
1
13-9