Scope Of Supply; Application; Structure And Mode Of Operation - HBM T10FM Mounting Instructions

8
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
1

Scope of supply

• Rotor
• Stator
• Mounting Instructions
• Test report
• Option: Speed kit (slotted disc, screwdriver, screw locking device, screws)
2

Application

T10FM torque flanges record static and dynamic torques on fixed or rotating
shafts and establish the rotation speed whilst indicating the direction of rota-
tion. Test beds can be extremely compact because of their very short con-
struction. They offer a very wide range of applications.
In addition to conventional test-rig applications (motor, roller and gear test-
rigs) new solutions for torque measurements partly integrated into the machi-
nes are possible.
Designed without bearings and with non-contacting transmission of excitation
voltage and measured values, the torque measuring system of the gaging
flanges is maintenance-free. This means that effects due to friction or the hea-
ting of bearings simply do not arise.
Torque flanges are supplied for nominal (rated) torques from 15 kN⋅m to
80 kN⋅m. Depending on the nominal (rated) torque, maximum speeds of up to
6000 rpm are permissible.
The T10FM torque flanges are protected from electromagnetic interferences.
They have been tested with regard to EMC according to the relevant Euro-
pean standards, and carry the CE mark.
3

Structure and mode of operation

The torque flange consists of two separate parts: the rotor and the stator.
Strain gages (S.G.) have been mounted on the rotor. The rotor electronics for
excitation-voltage and measuring-signal transmission are located centrally in
the flange. Coils for the non-contact transmission of excitation voltage and
measuring signal are located on the outer circumference of flange B. The si-
HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
T10FM
B 23.T10FM.10 en