Type Of Rotation Speed Output Signal; Loading Capacity - HBM T10FM Mounting Instructions

T10FM
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
Fig. 7.9: Switch for doubling the pulses

7.7 Type of rotation speed output signal

You can use switch S7 to change the symmetrical 5 V output signal (factory
setting) to an asymmetrical signal of 0 V ... 5 V.
Switch S7
Fig. 7.10: Switch S7; symmetrical/asymmetrical output signal
8

Loading capacity

Nominal (rated) torque can be exceeded statically up to the limit torque. If no-
minal (rated) torque is exceeded, additional irregular loading is not permissi-
ble. This includes longitudinal forces, lateral forces and bending moments. Li-
mit values can be found in the "Specifications" chapter, Page 42.
B 23.T10FM.10 en
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
Switch S6
symmetrical
Pos.2
Doubling the pulses
On Off
S6
asymmetrical
Pos.1
35
HBM