Preparation For Fitting The Rotor - HBM T10FM Mounting Instructions

14
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com

4.4 Preparation for fitting the rotor

CAUTION
The rotor is heavy (depending on the measuring range, 26 kg – 60 kg)!
To lift it from its packaging and to fit it, use a crane or other suitable lif-
ting devices.
Two lugs are bolted to the rotor to aid transportation and assembly. Hook the
lifting harness into these lugs, as this is the only way to ensure that the rotor
will be lifted horizontally from its packaging (see Fig. 4.1).
CAUTION
You must remove these transportation and assembly lugs once the rotor
is fitted! Keep them somewhere you can find them.
Transportation and assembly lugs
Fig. 4.1: Transportation and assembly lugs on the rotor
1. Lift the rotor from its packaging, turn it horizontally by 180 degrees so that
flange B is pointing upwards (see Fig. 4.2).
HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
T10FM
B 23.T10FM.10 en