Electrical Connection - HBM T10FM Mounting Instructions

24
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
Radial alignment
The rotor axis and optical axis of the speed sensor must be along a line at
right angles to the stator platform. A conical turn (or colored marker) at the
central point of flange B and a vertical marker line on the sensor head serve
as orientation aids.
Center point for
aligning the rotor
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
Fig. 4.10: Orientation markers on the rotor/stator
5

Electrical connection

CAUTION
Transducer connection cables from HBM with attached connectors are
identified in accordance with their intended purpose (Md or n). When ca-
bles are shortened, inserted into cable ducts or installed in control cabi-
nets, this identification can get lost or become concealed. If this is the
case, it is essential for the cables to be re-labelled!
HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
Marker
Head of the sensor
B 23.T10FM.10 en
T10FM