Aligning The Stator (Speed Measuring System) - HBM T10FM Mounting Instructions

Hide thumbs Also See for T10FM:

Table of Contents

T10FM

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com

4.9 Aligning the stator (speed measuring system)

The stator can be mounted in any position (for example, "upside down" instal-

lation is possible).

For measuring mode to operate perfectly, the slotted disc of the speed measu-

ring system must rotate at a defined position in the optical sensor.

Axial alignment

There is a marker in the optical sensor for axial alignment (orientation line).

When installed, the slotted disc should be exactly above this orientation line.

Deviations of up to "2 mm are permissible in measuring mode (total of static

and dynamic shift).

Slotted disc

Orientation lines

Fig. 4.9: Position of the slotted disc in the speed sensor

NOTE

To attach the stator, we recommend the use of M6 screws with plain

washers (width of oblong hole, 9 mm). This size of screw guarantees the

necessary travel for alignment.

B 23.T10FM.10 en

HBM

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com

Table of Contents

Show Quick Links

Table of Contents