Mounting The Rotor - HBM T10FM Mounting Instructions

16
T10FM
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
Fig. 4.3: Rotor installation (horizontal)

4.5 Mounting the rotor

CAUTION
If the rotor is to operate perfectly, you must comply with the mounting
dimensions (especially the air gap area, see Page 40).
Additional installation notes for the speed measuring system can be found in
Chapter 4.8, Page 22.
NOTE
In general, the rotor identification plate is no longer visible after moun-
ting. This is why we include with the rotor additional stickers with the
important ratings, which you can attach to the stator or any other rele-
vant test-bench components. You can then refer to them whenever there
is anything you wish to know, such as the calibration signal.
HBM B 23.T10FM.10 en
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com