Safety Instructions - HBM T10FM Mounting Instructions

5
T10FM
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com

Safety instructions

Use in accordance with the regulations
Torque flanges T10FM are used exclusively for torque and rotation speed
measurement tasks and control and adjustment tasks directly connected the-
reto. Use for any additional purpose shall be deemed to be not in accordance
with the regulations.
In the interests of safety, the transducer should only be operated as described
in the Mounting Instructions. It is also essential to observe the appropriate le-
gal and safety regulations for the application concerned during use. The same
applies to the use of accessories.
The transducer is not a safety element within the meaning of its use as inten-
ded. Proper and safe operation of this transducer requires proper transporta-
tion, correct storage, assembly and mounting and careful operation.
General dangers of failing to follow the safety instructions
The transducer corresponds to the state of the art and is fail-safe. The trans-
ducer can give rise to remaining dangers if it is inappropriately installed and
operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of the transducer must have read and understood the Mounting Instructions
and in particular the technical safety instructions.
Remaining dangers
The scope of supply and performance of the transducer covers only a small
area of torque measurement technique. In addition, equipment planners, in-
stallers and operators should plan, implement and respond to the safety engi-
neering considerations of torque measurement technique in such a way as to
minimize remaining dangers. Prevailing regulations must be complied with at
all times. Reference must be made to remaining dangers connected with tor-
que measurement technology.
B 23.T10FM.10 en HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com