Serialport Settings; Serialport Loginrequired; Serialport Mode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

SerialPort settings

SerialPort Mode

Enable/disable the serial port.
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.

SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
137
Administrator Guide
System settings System settings Appendices