Cisco TelePresence SX10 Quick Set Administrator's Manual page 15

Cisco TelePresence SX10 Quick Set

Introduction Introduction
New features and improvements in CE9.1
New products
• Cisco Webex Codec Plus (formerly Cisco Spark
Codec Plus)
• Cisco Webex Room 55 (formerly Cisco Spark
Room 55)
Dual Screen experience and Active Control for
CMS based meetings
(SX80, MX700, MX800, Codec Plus, Room Kit, Room 55)
Dual screen video systems can utilize both screens
for video in a CMS based meeting. The video system
receives two transcoded video streams and one content
stream from the CMS, and utilizes both screens to render
the streams.
With Active Control enabled, you get a participant list
that shows all meeting participants and their current
activity status, such as mute, sharing and active speaker
indication. You can change the layout seamlessly from the
touch interface by using the layout selection panels.
New wake-up experience
(All products)
SX10, DX70, DX80: The wake-up experience has an
additional standby state: Halfwake. In Halfwake state, the
video system shows a simple on-screen interaction guide
when it is not in use.
Other products: The wake-up experience has two
additional standby states: Halfwake and Standby with
motion detection. When automatic wake-up is enabled,
the video system detects presence using ultrasound
(motion detection) or when pairing to a Cisco Proximity
client. The video system wakes up with a greeting before
going into the Halfwake state, which has a simple on-
screen interaction guide.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals
Bluetooth headset support
A Bluetooth headset can be used with the video system.
The headset must support HFP (Hands Free Protocol).
The user can enable Bluetooth and set the video system
in Bluetooth pairing mode from the user interface.
Support for the EAP authentication framework
for wireless networks
(DX70, DX80, Codec Plus, Room Kit, Room 55)
In addition to WPA-PSK and WPA2-PSK, the video system
now supports the WPA-EAP authentication framework
for Wi-Fi connections. In total the following methods are
supported:
• Open
• WPA-PSK (AES)
• WPA2-PSK (AES)
• EAP-TLS
• EAP-TTLS
• EAP-FAST
• PEAP
• EAP-MSCHAPv2
• EAP-GTC
Maintenance
Additions for Room Analytics
(DX70, DX80)
(All products except SX10, DX70, DX80)
Detect people presence in the room: The video system
has the capability to find whether there are people
present in the room. The feature is based on ultrasound,
and it does not keep record of who was in the room, only
whether or not the room is in use.
People count (only for Room Kit, Codec Plus, Room 55):
The video system counts the number of people in the
room when in a call, and when displaying the self-view
picture. You can configure the video system to also count
the number of people outside of call, but the video system
cannot count the number of people when it is in standby.
It does not keep record of who was in the room, only the
number of faces that were detected.
Network port 2 can be disabled
You can connect a computer to the network through the
video system's second network port. Then you only need
one network wall socket to support both the video system
and the computer.
For security reasons, we recommend that you disable
this network port if the video system is used in a public
environment. This way, you prevent someone from
connecting a computer to your network through the video
system.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
15
Administrator Guide
System settings Appendices
(DX70, DX80)