Peripherals Profile Touchpanels - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Peripherals Profile TouchPanels

Define the number of Cisco Touch controllers that are expected to be connected to the
video system. This information is used by the video system's diagnostics service. If the
number of connected Touch controllers does not match this setting, the diagnostics service
will report it as an inconsistency.
Requires user role: ADMIN, INTEGRATOR
Default value: NotSet
Value space: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one Cisco Touch controller should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
video system. Note that only one Cisco Touch controller is officially supported.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
126
Administrator Guide
System settings System settings Appendices