Cisco TelePresence SX10 Quick Set Administrator's Manual page 36

Cisco TelePresence SX10 Quick Set

Introduction Introduction
How to administer the video system (page 2 of 4)
The web interface of the video system
The web interface is the administration portal for
the video system. You can connect from a computer
and administer the system remotely. It provides full
configuration access and offers tools and mechanisms
for maintenance.
Note: The web interface requires that HTTP or HTTPS
is enabled (refer to NetworkServices > HTTP > Mode
setting).
We recommend that you use the latest release of one
of the major web browsers.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals
Connect to the video system
Open a web browser and enter the IP address of the
video system in the address bar.
How to find the IP address
1. Select the contact information in the
upper left corner of the user interface.
2. Select Settings, followed by
device.
Sign in
Enter user name and passphrase for the endpoint and
click Sign In.
The system is delivered with a default user
named admin with no passphrase. Leave the
Passphrase field blank when signing in for the
first time.
It is mandatory to set a password for the
admin user.
Maintenance
About this
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
36
Administrator Guide
System settings Appendices
Sign out
Hover the mouse over
the user name and
choose Signout
the drop-down list.
from