Cisco TelePresence SX10 Quick Set Administrator's Manual page 27

Cisco TelePresence SX10 Quick Set

Introduction Introduction
UserInterface OSD Output
(Room Kit)
OLD: Default value: 1
NEW: Default value: Auto
Video Input Connector[2] Name
(Codec Plus, Room 55)
OLD: Default value: PC (HDMI1)
NEW: Default value: PC 1 (HDMI)
Video Input Connector[3] Name
(Codec Plus, Room 55)
OLD: Default value: PC (HDMI2)
NEW: Default value: PC 2 (HDMI)
Video Output Connector[1] Resolution
(MX200G2, MX300G2, DX70, DX80, Room 55)
OLD: User role: ADMIN, INTEGRATOR
NEW: User role: ADMIN, INTEGRATOR, USER
Video Selfview OnCall Mode
(Room Kit)
OLD: Default value: Off
NEW: Default value: On
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
27
Administrator Guide
System settings Appendices